Single sided-hinged doors are usually used as an access door, or as emergency exits depending on the lock mechanism selected.

A single sliding door is usually used where there is not enough space to open a side-hinged door for normal access and where just a single section is required opened.

Single sliding doors without rails are the ideal solution where objects higher than the rail need to pass through the opening. The door is a good choice where goods must be moved using an overhead traveling crane or fork lift truck.

An overlapping sliding door is the perfect solution where space is limited. The sliding door can also be used when there are two output points from one machine.

A double sided-hinged door can be used as an access door and for bringing goods in and out.

A single sliding door is usually used where there is not enough space to open a side-hinged door for normal access and where just a single section is required opened.

A double telescopic sliding door with rails is used where a large opening is required but where space is limited in the sideways direction. The panels overlap each other instead sliding to the side.

A triple telescopic sliding door with rails is used where a large opening is required but where space is limited in the sideways direction. The panels overlap each other instead sliding to the side.

Double sliding doors are a perfect solution where space is limited and when a door in the middle is required. Each half of the door slides away from the other.

Single sliding doors without rails are the ideal solution where objects higher than the rail need to pass through the opening. The door is a good choice where goods must be moved using an overhead traveling crane or fork lift truck.

Sliding door without rail with centre lock are the perfect solution where unrestricted height clearance is required and where a large opening is needed. The door is a good choice where goods must be moved using an overhead travelling crane or fork lift truck.

Single sliding doors without rails are the ideal solution where objects higher than the rail need to pass through the opening. The door is a good choice where goods must be moved using an overhead traveling crane or fork lift truck.

The X-Guard detachable hinge door is a mobile hinge door on wheels and meant to be operated the same way as a normal hinge door. This door is a great option when space around the door is limited. If desired, just detach it and roll it aside.

The combined hinged- and sliding door offers 2000 or 4000 mm wide opening in compact way. All the advantages of both door types are merged into one. The door has folding panels on wheels, which means that you quick and easily can open the door by sliding the door panels together and then folding them down.    

Sliding door without rail with centre lock are the perfect solution where unrestricted height clearance is required and where a large opening is needed. 

The combined hinged- and sliding door offers 2000 or 4000 mm wide opening in compact way. All the advantages of both door types are merged into one. The door has folding panels on wheels, which means that you quick and easily can open the door by sliding the door panels together and then folding them down.    

Smart and elegant solution for sliding doors when power is required on the movable door itself. For example to a door interlock switch. Especially designed for double sliding doors locked in the centre, with or without an overhead rail, where a fixed post to attach a cabling is missing.

Rail fitting kit in aluminium, used for sliding doors with wider opening. Suitable for sliding doors; D20-, D22-, D23-, D24 and DP20-, DP22-, DP23-, DP24. D40-, D42-, D43-, D44- and DP40-, DP42-, DP43- and DP44-. 

Rail fitting kit in steel, suitable for sliding doors: D20-xxx100 & D20-xxx140.

Snap lock for hinge door, right/left: L10-05-0

Hitch lock for hinge doors right/left: L10-05-2

X-Lock for all doors: L66-20-X

X-It Cylinder lock: XIT-R01-101

X-It "Slam Shut", escape release function for hinge door: XIT-R14-101

X-It Electric, escape release function: XIT-R09-101

Axelent X-It is a keyed cylinder lock designed primarily for all our modular mesh panel systems for machine guarding, industrial/warehouse. Thanks to the unique construction and it’s simple assembly, the lock can also be used for similar third party products/systems available on the market

X-It has a lot of possibilities! Combine with other accessories like code locks and indicators. 

Axelent offers several mounting possibilities, of which Bracket Mounting, Top Mounting and Keyhole Mounting are the most common. All mountings are quick and easy to assemble.  

The mesh panel bracket enables vertical cable runs through the middle of the mesh panels. Brackets, Pendants and X10 Brackets enable optional placement on machines, walls, ceilings and floors.

Axelent offers several mounting possibilities, of which Bracket Mounting, Top Mounting and Keyhole Mounting are the most common. All mountings are quick and easy to assemble.  

The mesh panel bracket enables vertical cable runs through the middle of the mesh panels. Brackets, Pendants and X10 Brackets enable optional placement on machines, walls, ceilings and floors.

Axelent offers several mounting possibilities, of which Bracket Mounting, Top Mounting and Keyhole Mounting are the most common. All mountings are quick and easy to assemble.  

The mesh panel bracket enables vertical cable runs through the middle of the mesh panels. Brackets, Pendants and X10 Brackets enable optional placement on machines, walls, ceilings and floors.

Extensions for X-Guard and X-Store for 50x50 and 70x70 posts.

The foot cover gives a well designed appearance and makes it easier to keep clean. It consists of two sections which are simply attached together to form one unit.

Combination option with counter plate and welding with posts for X-Guard, X-Store and X-Rail. 

Panels may need to be cut to precise heights and widths in some environments. The X-Guard cutting pack can be used to help you cut panels and is available in both vertical and horizontal versions. 

The kick plate is available in two lengths and can be cut into proper lengths on site during assembly. The kick plate fits to our machine guard X-Guard, warehouse system X-Store and X-Rail fall protection. 

The equipotential bonding kit is used to achieve earth bonding, or protective (equipotential = EP) bonding of X-Guard machine guarding and X-Rail fall protection.

X-Guard Lite is a simpler version of our X-Guard Classic. A functional accident prevention system for environments with demands on stability. Our X-Guard Lite is based in general on the same smart thinking that other systems in the X-Guard family use. Easy to install and easy to complete.

Our X-Rail fall protection system can be used as an edge protection for mezzanine floors. The system is a modification of our X-Guard range and therefore the system can fill dual purposes, mezzanine protection and machine guarding. X-Rail can be used either without panels or with X-Guard Classic panels - mesh, plastic, and sheet metal.

X-Store warehouse partitioning is possible to use with several different panel combinations. 

The new X-Store 2.0 comes with a lot of innovative and smart solutions. In this instruction video you can watch how easy and intuitive X-Store 2.0 is to assemble.

The new X-Store 2.0 comes with a lot of innovative and smart solutions. In this instruction video you can watch how easy and intuitive X-Store 2.0 is to assemble.

Use the X-Protect Impact Barrier for ground level impact protection. It is ideal for segregating light weight vehicles or defining warehouse zones. Our modular rails and bollards allow for damaged or worn parts to be replaced at a component level. 

Use the X-Protect Double Impact Barrier configuration to protect structures from high level, heavy duty impacts. It is one of our strongest Impact protection configurations.

Use the X-Protect Pedestrian barrier configuration to define pedestrian routes and protect from light duty impacts. It is also possible to combine with a pedestrian gate.